Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 31 Monday, February 20, 2023 2:02 PM
Control Panel
Control Panel Features for the Dryer
Power On/Off Button
a
• Press this button to turn the dryer on or off.
• Pressing this button during a cycle will cancel that cycle and any load settings will be lost.
WASH/DRY Button
b
• Press this button to switch the center display between the washer and the dryer.
Status Display
c
• The current cycle and settings are shown in the display.
• Estimated time remaining and status messages are shown after drying starts.
SETTINGS Button
d
• This button allows you to select additional cycle options.
Start/Pause Button
e
• Press and hold this button to start the selected cycle.
• If the dryer is running, use this button to pause the cycle without losing the current settings.
NOTE
• If the Start/Pause button is not pressed to start the selected cycle, after a delay the dryer automatically
turns off and all cycle settings are lost.
Cycles
f
• Either swipe over the cycle name to scroll through and select a cycle, or touch the down arrow next to
the cycle name to open the list of cycles.
• Once the desired cycle has been selected, the standard presets will appear in the display. These
settings can be adjusted using the Cycle Modifier buttons at any time before starting the cycle.
Cycle Modifier Buttons
g
• Use these buttons to adjust the dry temperature, dry level and dry time settings for the selected
cycle.
• The current settings are shown in the display.
• Press the button for that option to select other settings.
OPERATION-DRYER
31
Publicidad
