Devolo Magic 1 LAN1-1 Manual página 52

13 Introduction
2.3.1Reading the indicator light
The integrated indicator light (LED) shows the sta-
tus for the devolo Magic 1 LAN by illuminating
and/or flashing:
LED
1 Red LED
2 Red LED
1-1
devolo Magic 1 LAN
Flashing be- Meaning
haviour
Lights up for Start-up process
up to 2 sec.
Flashes at in- Status 1:
tervals of 0.5 The reset of the devolo Magic adapter was
sec. (on/off) successful. The PLC/reset button has been
pressed and held for 10 seconds.
Status 2:
The devolo Magic adapter (once again) has
the factory default settings. Since the last re-
set, no pairing with another devolo Magic
adapter has taken place.
Connect
devolo Magic adapter to create a full-
fledged PLC network as described in Chap-
ter 2.3 Pairing.
the adapter with another
LED status display
(web interface*)
Cannot be disabled
Cannot be disabled