Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Fitting Kit
K325W
Ensure location peg engages the inner side
of the rails.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Ensure that the crossbar is adjusted evenly
at both ends.
Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
Temporarily mark with masking tape or
pencil the position of crossbars on the rail.
8
Publicidad
Tabla de contenido
