Descargar Imprimir esta página

eufy Security CAM 2C Guia De Inicio Rapido página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
D o not use the D evice in the environment at
too high or too low temperature, never expose
the D evice under strong sunshine or too wet
environment.
The suitable temperature for H omeBase 2 and
accessories is -10°C-45°C .
The suitable temperature for eufyCam 2C and
accessories is -20°C-50°C .
W hen charging, please place the device in an
environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~ 25°C .
Please ensure to use only the charger offered by
the manufacturer. Using unauthorized charger
may cause danger and violate the authorization
of the device and the guarantee article.
This charger is for indoor use only. The charger
type is KA 2401A-1202000D E, output voltage/
current is 12Vdc/2A. The plug considered as
disconnect device of adapter.
RF exposure information: The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d= 20 cm
between the device and the human body.
To maintain compliance with RF exposure
requirement, use product that maintain a 20cm
distance between the device and human body.
C AUTIO N RISK O F EX PLO SIO N IF BATTERY
IS REPLACED BY AN IN CO RRECT TYPE.
D ISPO SE O F USED BATTERIES ACCO RD IN G
TO TH E IN STRUCTIO N S.
SUB-1G Frequency Range (for T8010X ):
866~ 866.8MH z; Sub-1G Max O utput Power
(for T8010X ): 5.24dBm (ERIP)
W i-Fi O perating Frequency Range:
2412~ 2472MH z; W i-Fi Max O utput Power :
18.40dBm (ERIP for T8010X ), 18.83dBm (ERIP
EN
12
for T8113S)
The following importer is the responsible party
(contact for EU matters only)
Anker Innovations D eutschland GmbH I Georg-
Muche-Strasse 3, 80807 Munich, Germany
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should
be delivered to an appropriate collection
facility for recycling. Proper disposal and
recycling helps protect natural resources,
human health and the environment.
For more information on disposal and
recycling of this product, contact your
local municipality, disposal service, or the
shop where you bought this product.
IC St at em ent
This device complies with Industry Canada
licence-exempt RSS standard(s). O peration is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CN R
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement."
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme N MB-003 du Canada.
IC RF St at em ent :
W hen using the product, maintain a distance of 20cm from the body to ensure compliance with RF
exposure requirements.
aux exigences en matière d'exposition RF.
This product complies with the radio interference requirements of the United Kingdom.
Declarat ion of Confor m it y
H ereby, Anker Innovations Limited declares that the product is in compliance with Radio Equipment
Regulations 2017. The full text of the UK declaration of conformity is available at the following internet
address: https://uk.eufylife.com
Anker Technology (UK) Ltd I Suite B, Fairgate H ouse, 205 Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom
EN
13

Publicidad

loading