Usb Playback; Playing Usb Storage Devices; Repeat Play; Random Play - Pioneer X-SMC02 Manual De Instrucciones

06

USB playback

Chapter 6:
USB playback

Playing USB storage devices

It is possible to listen to two-channel audio using the USB
interface with MP3 files on the top of this unit.
• Pioneer does not guarantee that any file recorded on a
USB storage device will play or that power will be
supplied to a USB storage device. Also note that
Pioneer will accept no responsibility whatsoever for loss
of files on USB storage devices caused by connection
to this unit.
• For details about MP3, see page 28.
1 Press USB as the input source.
"USB" is shown on the main display.
2 Connect the USB storage device.
• This unit does not support a USB hub.
USB storage device
(commercially
available)
3 When the recognition is completed, press
/ to select the folder where the music file is
stored ([F_ ]), then press  or ENTER.
• MP3 track data is called "music file" and the location
they are stored is called a "folder" in this document.
• Repeat this step if there are other folders inside the
selected folder.
• To return to the previous folder, press
Press / to select the music file, and then
4
press 1; or ENTER.
• Once play starts, only music files inside the same folder
can be played continuously.
• For details about the basic operations, see page 12.
14
En
• When changing to a different input source, stop the
USB memory playback first, before changing.
• Turn the power off before removing the USB storage
device.
Note
• This unit may not recognize a USB storage device, play
files or supply power to a USB storage device. For
details, see When a USB storage device is connected
on page 26.
• When a USB storage device is not playing and the unit
has not been operated for 20 minutes or more, the
power will automatically turn off. In this case it is
required that the Auto power off is switched to ON
(page 10).

Repeat play

Repeat play can play one track or all tracks continuously.
To repeat one track:
Press
ENTER.
To repeat all tracks:
Press
ENTER.
To cancel repeat play:
Press
ENTER.
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the file of USB storage device will play
continuously.
• During repeat play, random play is not possible.

Random play

The file of USB storage device can be played in random
order automatically.
To random play all tracks:
Press RANDOM repeatedly until "RDM ON" appears. Press
ENTER.
To cancel random play:
Press RANDOM repeatedly until "RDM OFF" appears. Press

or .
ENTER.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation.
repeatedly until "RPT ONE" appears. Press
repeatedly until "RPT ALL" appears. Press
repeatedly until "RPT OFF" appears. Press