Pioneer X-SMC02 Manual De Instrucciones página 27

Additional information
When the Bluetooth wireless technology device is connected or operated
Problem
The Bluetooth wireless technology device cannot be connected or
operated.
Sound from the Bluetooth wireless technology device is not emitted
or the sound is interrupted.
Remedy
Check that no object that emits electromagnetic waves in the 2.4
GHz band (microwave oven, wireless LAN device or Bluetooth
wireless technology apparatus) is near the unit. If such an object is
near the unit, set the unit far from it. Or, stop using the object
emitting the electromagnetic waves.
Check that the Bluetooth wireless technology device is not too far
from the unit and that obstructions are not set between the
Bluetooth wireless technology device and the unit. Set the
Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m* and no
obstructions exist between them.
* The distance given is to be used as a rough guide. The actual
allowable distance between devices may vary depending on
conditions in the surrounding environment.
The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless
technology. Check the setting of the Bluetooth wireless technology
device.
Pairing may not have been done properly or the pairing setting
may have been deleted on either this unit or on the Bluetooth
wireless technology enabled device. Perform pairing again.
Check whether the device you are trying to connect supports the
profile. Use a Bluetooth wireless technology enabled device that
supports A2DP.
Check if this unit is connected with a Bluetooth wireless
technology device with an input source other than BT AUDIO
selected. Perform paring procedure after selecting BT AUDIO as
the input source.
10
27
En