Cooper Lighting Solutions Greengate RC3DEHC Instrucciones De Instalación página 18

Room Controller for Healthcare
Input Button Icon
1
1
1
1
1
1 2
(General)
2
2
2
2 2
3
(Exam) 1
3
3
3
3
ALL 3
2
(Reading)
ON/OFF
4
ALL
ALL
ALL
ALL
3
ON/OFF
(All) ON/OFF
ON/OFF
ON/OFF
Raise
ALL
ON/OFF
Lower
Final dimmer output level is determined by the following combination:
†
High end trim level
●
Daylighting contribution
●
If enough natural light is entering the space and either of these features has been implemented, raise commands from
pushbuttons or the Greengate Patient Control Station will not override or raise the lighting above the target threshold
implemented by these advanced energy savings methods.
Additional Information:
Emergency relay will always work under normal conditions with Load 1 (yellow lead).
Alternate Voltage Switchpack: Click & Go connected alternate voltages switchpacks will always track with Load 1 (yellow lead).
www.cooperlighting.com
Control Type
(Unless a target level is indicated, the dimmer output will default to daylight sensor control.)
Toggle Load 1 (yellow) ON and OFF, Sets Raise/Lower control action to control Dimmer 1
Toggle Load 2 (red) ON and OFF, Sets Raise/Lower control action to control Dimmer 2
Toggle Load 3 (purple) ON and OFF, Sets Raise/Lower control action to control Dimmer 3
Load 1 (yellow), Load 2 (red), Load 3 (purple) ON and OFF, Sets Raise Lower control action to control
Toggle
Raise the selected dimmer zone.
Raise
control all zones together, ensure that the ALL button is pressed prior to raising the zones.
Lowers the selected dimmer zone. Zone controlled is based on last GPCS
Lower button that was pressed. To control all zones together, ensure that the ALL button is pressed prior to
Function
dimmers 1, 2 and 3
Zone controlled is based on last GPCS button that was pressed. To
†
raising the zones.
Greengate
9850-000366-04 page 18
October 2021