Cooper Lighting Solutions Greengate RC3DEHC Instrucciones De Instalación página 6

Room Controller for Healthcare
Mounting
Mount wallstations to a single gang wall box with a
minimum internal depth of 2 inches (51mm). Up to four
wallstations may be connected to the Room Controller to
meet your application.
Switchpack
White
Receptacle
Red
BMS/Out
Black Sensors
Sensors
Green
Slider
Station
Wallstations
-
A/V
+
Mode
-
Demand
+
Response -
Alert +
Mode
-
Time
+
Clock
Energy Options DIP Switch
Demand Response Occupancy Not Used
1 2 3 4
Default 10% Occ
20% Vac (default)
30%
40%
0-10V Dimming Outputs
- - -
+ + +
Dimmer 3 Dimmer 2 Dimmer 1
QuickConnect Cable
Use the shortest lengths of QuickConnect cable from your
QuicKit that will reach your intended wallstation locations.
Once the wallstations are installed, connect the wallstations
to the wall box and attach the wallplates.
*For red color wallstation only.
www.cooperlighting.com
6
5
4
3
2
1
Dimmer 3 - Dimmer 2 - Dimmer 1 -
+ + +
0-10V Dimming
(Class 2)
Entry Wallstation
(Back)
Main Body
Front Cover
N ote: Wallstations can be connected to more than one
Room Controller, however they will perform the
same functions. See the app note: "Joining multiple
Room Controllers via the keypad interface" on our website.
Connect a QuickConnect cable between the designated
wallstation Click & Go port on the Room Controller and to
one of the Click & Go ports on the Entry wallstation.
Connect up to three additional stations using additional
QuickConnect cables to connect station to station.
1
1 1
QuickConnect QuickConnect
Cable (Class 2) Cable (Class 2)
Additional Wallstation
(Back)
Front Cover
*For all colors excluding red.
QuickConnect
Cable (Class 2)
Additional Wallstation Additional Wallstation
(Back)
Inner Plate
Greengate
(Back)
Main Body
9850-000366-04 page 6
October 2021