Vermeiren LiNX 200 Manual De Instrucciones página 9

Battery
charge
indicator
Table 1: Battery charge indicator
Display
The battery charge indicator (located above the on/off
button) is used to indicate that your wheelchair power is
on. The indicator provides an estimate of the remaining
battery capacity.
In the following table all battery indications and their
meanings are collected.
Description
All LED's dark.
All LED's are lit and the
green LED's are flashing.
All LED's are lit.
1 Green led is lit.
Only red and amber LED's
lit.
Red and amber LED's lit.
Only Red LED lit.
1 Red Led is flashing.
First red LED flashes on
the battery indicator.
The status indicator will
display a flash code 2 or 7.
The horn will sound once
every 10 seconds.
Meaning
System off.
System on.
High voltage warning:
battery voltage level has
risen above the high voltage
warning set-point.
System on.
System on.
Low battery level.
Very low battery level.
Battery almost empty.
Battery empty.
Low voltage warning:
battery voltage level
decreased below its low
voltage warning set-point.
Battery voltage decreases
below the battery cut-off
voltage.
7
LiNX 200
2023-03
Operating console functions
Remarks
Warning: battery too full.
Slow down if you are driving
down a slope.
LED's show the charge
level.: Full battery (between
80 and 100% of full
capacity)
Battery level is decreasing.
Battery half full. Start the
return journey.
Battery low (between 0 and
20% of full capacity).
Recharge soon.
Recharge now.
Recharge immediately.
Battery is fully discharged,
and it is good practice to
stop discharge at this point.
The display and wheelchair
shut down automatically.
EN
NL