Throttle Grip - Benelli TRK 502 Manual Del Propietário

ITEM CHECKS
Rear brake
Clutch

Throttle grip

Control cables
Drive chain
Wheels and tires
Brake and shift
pedals
•
Check operation.
• If soft or spongy, have Benelli dealer bleed hydraulic system.
• Check brake pads for wear.
•
Replace if necessary.
•
Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
•
Check operation.
•
Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
•
Make sure that operation is smooth.
•
Check throttle grip free play.
• If necessary, have Benelli dealer adjust throttle grip free play and lubricate cable and grip housing.
•
Make sure that operation is smooth.
•
Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
•
Check chain condition.
•
Lubricate if necessary.
•
Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
•
Correct if necessary.
•
Make sure that operation is smooth.
•
Lubricate pedal pivoting points if necessary.
For your safety – pre-operation checks
4 - 2
EN
4