Checking The Brake Lever Free Play; Brake Light Switches - Benelli TRK 502 Manual Del Propietário

3) After adjusting, tighten the clutch ring nut.
1
1. Clutch ring nut
2. Clutch screw
TIP
If the specified free play cannot be obtained
as described above or if the clutch does not
operate correctly, have a Benelli dealer check
the internal clutch mechanism.

Checking the brake lever free play

There should be no free play at the brake lever
end. If there is free play, have a Benelli dealer
inspect the brake system.
2
WARNING
A soft or spongy feeling in the brake lever
can indicate the presence of air in the hy-
draulic system. If there is air in the hydrau-
lic system, have a Benelli dealer bleed the
system before operating the vehicle. Air in
the hydraulic system will diminish the bra-
king performance, which may result in loss
of control and an accident.
Periodic maintenance and adjustment

Brake light switches

The brake light, which is activated by the bra-
ke pedal and brake lever, should come on just
before braking takes effect.
If necessary, have a Benelli dealer adjust the
brake light switches.
6 - 19
EN
6