Kingfisher CL5ZFXLK90 Manual De Instrucciones página 93

05 Using the Timer Function
The Timer can be used as:
1. A countdown timer where no cooking zones are controlled.
2. A power timer that switches off the cooking zone at the end of the set period. The maximum selectable
time period is 99 minutes.
Using the timer as an alarm
1. As an alarm that does not alter any of the cooking zones.
2. Select the cooking zone and select the power level required.
3. Touch the " " or "
4. Or touch and hold the "
will commence countdown and show the remaining time. The timer will beep for 30 seconds once
completed.
5. To cancel the alarm press"
Using the timer to switch off the zones
NOTE: This function only operates on one zone at a time; the other zones will continue to operate as normal.
NOTE: You can use the timer function independently of the cooking zones.
1. Select the cooking zone and the power required.
2. Touch the timer key
3. Before the indicator stops flashing, touch the "
at a time.
4. Or touch and hold the "
commence countdown and show the remaining time.
The timer will beep for 30 seconds once completed.
5. To cancel the timer, press Timer
"00".
REMARK: You can check remaining time in each zone by touching the relevant Cooking zone. The display
will show the timer of alarm first, and then the power timer of cooking zones.
5059340445816_MNL_IN_V02.indb 92 5059340445816_MNL_IN_V02.indb 92
" keys once to increase or decrease one minute at a time.
" or " " keys to increase or decrease ten minutes at a time. The timer
" key until display shows "00".
and the timer will flash "10".
" or " " keys to increase or decrease ten minutes at a time. The timer will
of the cooking zone and then press "
" or " " keys once to increase or decrease one minute
92
" key until display shows
20-06-2022 13:11:39 20-06-2022 13:11:39