Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble Shooting
Problem
Possible cause
ON / OFF switch (10) is
turned off
Pressure
Damaged power supply
cleaner is not
cable (6)
operating
Mains fault
Air trapped in the pressure
Pressure
cleaner
cleaner does
not generate
any pressure
Drop in the water mains
pressure
Severe pres-
Standard Vario nozzle (17)
sure fluctua-
soiled
tions
Connections not fitted
correctly
Leaks in the
water system
Water connection leaks
Remedy
Check ON / OFF switch (10)
Switch off the equipment and discon-
nect from the mains. Check power
supply cable (6) for damage. If neces-
sary have the power supply cable (6)
replaced by a qualified electrician.
Check the electrical system for conform-
ity with the data on the rating plate.
Turn on the device with the high-pres-
sure gun (without nozzle) until bub-
ble-free water comes out of the
high-pressure connection.
Check the water mains.
Rinse the standard Vario nozzle (17)
with water. Clean the nozzle with
the nozzle cleaning needle (23), if
necessary.
Turn off the device and disconnect it
from the mains. Reconnect the device to
the water
(cf. "Preparation")
Switch off the equipment and discon-
nect from the mains. Replace the water
connection (9) inc. gasket
GB
31
Publicidad
