Descargar Imprimir esta página

VITO GARDEN VISM52 Manual De Instrucciones página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
2. GENERAL USE &
SAFETY WARNINGS
WARNING!
While
gardening tools, several basic
safety precautions must always be
followed in order to reduce the risk
of fire, electric shock and personal
injuries.
Read and understand the
manual before operating the
machine. Save these instructions
and other documents supplied with
this machine for future reference.
2.1 - GENERAL
These
preventive
measures
essential for your safety. Always use
this machine with care in a responsible
manner having in consideration that
its user is responsible for eventual
accidents caused to third parties or
their goods.
The machine, accessories included,
may only be used by who have read
and fully understand the operating
instructions. Before operating it for the
first time, its user must be instructed
by the vendor or a competent person
about its functionalities. This instruction
manual in an integral part of the
machine and must always be provided.
Get familiar with the equipment's
control devices and operation. The user
must know how to stop the equipment
immediately.
Use this equipment only if you are in
good physical and mental conditions.
Do not use it if you are tired or under
the influence of alcohol, drugs or
medication. If you suffer from any
health problem, please ask your doctor
about the possibility of using the tool.
Those who have cardiac devices
(pacemakers) must not operate
this type of tool nor be close to them
without medical permission.
30
The starter system of this tool
produces an electromagnetic field
during its operation. This may, in some
circumstances, interfere with active or
passive medical implants. To reduce
the risk of serious or even fatal injuries,
using
everyone who has this type of devices
must consult their doctor before using
the equipment.
Never allow this machine to be used by
children, people with limited physical,
sensorial or mental capabilities, with
lack of experience and knowledge of
this equipment and who is not familiar
with the instructions.
This equipment must only be
operated as described in this
instruction manual. No other use is
allowed besides the described.
are
For safety reasons, any changes other
than the assembly of accessories
authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.
2.2 - FUELLING AND
HANDLING
Gasoline is toxic and highly
flammable!
appropriate
containers. Never use bottles to remove
or storage service products, such as
fuel. Someone, particularly children,
may be mistakenly taken to drink them.
Always tighten the container cap.
Damaged covers must be replaced.
Keep gasoline away from sparks,
flames and any source of ignition. Do
not smoke nearby gasoline containers
or machines, or during the filling
process.
Drain out and refuel the equipment only
outdoors. Before refuelling, turn off the
engine and allow it to cool down. Open
the cover carefully in order to dissipate
Keep
it
in
and
homologated
the existing overpressure inside the
tank.
Do not overfill the fuel tank. The fuel
needs room to expand, therefore
never add fuel above the bottom
edge of the filler. Additionally, follow
the combustion engine instructions
described in this manual.
In case of overflow, clean any spilled
fuel immediately. The combustion
engine should only be started after
the surface is completely cleaned. Any
attempt to ignite should be avoided until
the gasoline steams have volatilized
(dry with cloth).
If gasoline has been spilled over
clothing it must be changed.
2.3 - BEFORE OPERATING
Make sure that the machine is only used
by who is familiar with the instruction
manual.
Before starting the engine,
check if the fuel system is
properly sealed, in particular the tank
cover and the hose connections. In
case of leaks or damages, do not start
the
combustion
engine.
technical assistance to an official
dealer.
Before using the machine, replace all
the damaged parts.
Check if all nuts and screws are
properly tightened. A regular inspection
is important to ensure safety and a
good machine performance.
Before using the machine, check if the
spark plug is properly connected to the
pipe.
To ensure a safe machine operation, it
is necessary to check that:
� The equipment is properly assembled;
� The safety devices are in perfect
conditions and functioning correctly.
Never operate the machine if any safety
Ask
for

Publicidad

loading