Publicidad
Enlaces rápidos
Assembly Instructions
178W
Hawthorne
Barstool
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
177W
Hawthorne
Counterstool
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any
Rev. 5/05
Publicidad
Manuales relacionados para Whittier Wood Products Hawthorne 177W
Resumen de contenidos para Whittier Wood Products Hawthorne 177W
- Página 1 Service Policy: We will replace any parts which are defective, missing or Counterstool damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Página 2 177W Counterstool & 178W Barstool — Parts List Before beginning assembly, check that the quantities of the parts received match those on the parts list below. A — Lower Back — Qty. 1 B — Back Spindle — Qty. 5 J —...
- Página 3 177W Counterstool & 178W Barstool — Parts List U — Lower Side Stretcher (14 ") — Qty. 2 T — Wooden Button — Qty. 6 PARTS DIAGRAM Right Front Leg Front Stretcher Lower Side Stretcher Upper Side Stretcher Left 2¾" Black Front Screw Front...
- Página 4 177W Hawthorne Counterstool & 178W Hawthorne Barstool ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Wood Glue, Rubber Mallet or Padded Hammer. IMPORTANT: READ GLUING HINTS BEFORE ASSEMBLING! Not intended for use by children without adult supervision. FIG. 1 1) Spread a thin layer of glue in the five holes in the top edge of the Lower Back (A). Insert the Back Spindles (B) into the holes.
- Página 5 Square end Angled end FIG. 3 3) Glue two Dowels (P) in each end of the Front Apron (G) and the Side Aprons (H). Lay the aprons on the bottom of the Seat (J) in their approximate positions. See FIGURE 3. Note: The Front Apron (G) is square on both ends.
- Página 6 FIG. 6 7) Lay the Seat (J) face down on a clean protected surface, with the back of the seat hanging over the edge. Center the leg assembly on the seat and making sure that the seat remains in contact with the back legs, fasten in place with 2¾"...
- Página 7 Instrucciones para Armar 177W Banqueta Hawthorne Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se 178W dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
- Página 8 177W y 178W – INSTRUCCIONES PARA ARMAR HERRAMIENTAS NECESARIAS: Destornillador Phillips, mazo de caucho o martillo, pegamento. FIG. 4 — side stretcher hole = orificio lateral para el IMPORTANTE: travesaño; dowel holes = orificios para las espigas de unión; ¡LEA LOS CONSEJOS SOBRE ENCOLADO Glue all dowels = Pegue con pegamento todos los taquetes ANTES DE ARMAR! 4) Aplique pegamento y luego inserte los dos travesaños...
- Página 9 Instructions de Montage 177W Tabouret de comptoir Politique de service : Nous remplacerons toutes Hawthorne les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter directement le service clientèle de Whittier Wood 178W Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
- Página 10 177W et 178W – INSTRUCTIONS D’ASSEMBLAGE OUTILS NÉCESSAIRES : Tournevis cruciforme, maillet en caoutchoue ou marteau, colle. IMPORTANT : L’extrémité avant des tabliers latéraux (H) est en équerre et leur extrémité arrière est biseautée, afin de AVANT DE PROCÉDER À L’ASSEMBLAGE, LISEZ LES CONSEILS DE COLLAGE ! pouvoir être placée contre les pieds arrières.