Denver DAH-126 Manual Del Usuario página 4

OPERATION
For optimal reception, fully extend the antenna and adjust its angle.
Press the standby button to turn on/off the unit.
The volume can be adjusted during playback with the volume controls
Vol+ / Vol-.
DAB RADIO
Press Mode to select DAB mode.
When the radio is switched on for the first time, it will automatically do a full
scan of DAB stations and store the stations.
Note
If there is no DAB reception at any time, move the unit to another place
or adjust the antenna.
CHANGING DAB STATIONS
Press the buttons Prev or Next in DAB mode to navigate available DAB
stations and press Select to confirm.
DAB AUTO SCAN
Press and hold the button Menu in DAB mode and then the buttons
Prev or Next until Full scan appears on the display. Press Select to
confirm.
Note
New stations and services are added to the stored DAB stations.
To make new DAB stations and services available on your radio, run a full
scan at regular intervals.
DISPLAYING STATION INFORMATION
Select a DAB station and during DAB radio playback, press Menu repeatedly
to display the following information (if available):
• Ensemble
• Frequency
• Signal frequency error
• Audio state and bit rate
• Date
• Radio text
• Signal strength
• Programme type
Power status (mains or
•
battery)
ENG-3