Publicidad
Idiomas disponibles
Idiomas disponibles
Step 11
5 Blade Installation
bber cushions, saving motor screws for blade installation. Using
ws (S5) provided, line up holes from the blade arm with the holes
or housing. Tighten screws securely.
All manuals and user guides at all-guides.com
12
1. To install the Switch Housing Assembly (8), locate both modular wiring
plugs (A) and (B). One extends from the mounting plate (E) on bottom of
fan body and one extends from the Switch Housing (8). Align the two plugs
so the latch on the side of the plugs will engage when pushed together. Push
the two plugs firmly together until latched.
2. Locate switch housing screws (S9). Raise switch housing cover (8) and
align the mounting holes with the holes on mounting plate (E). Once the
holes are aligned, attach the switch housing cover using the switch housing
screws (S9) and tighten firmly.
IMPORTANT: Be sure that no wires are caught in mounting slots or pinched between
switch housing and mounting plate.
Screws (F)
Mounting Slots (D)
CAUTION
To reduce the risk of personal injury, DO NOT bend the blade arms when
installing them. When balancing the blades, or cleaning the fan, do not insert
foreign objects in between rotating fan blades.
Step 12
Mounting Plate (E)
Modular Wiring Plug (A)
Modular Wiring Plug (B)
Switch Housing (8)
Publicidad
