Craftmade LC52 Instrucciones De Instalación página 8

Bulb Replacement
(use 7C7 night light replacement lamps)
ews from top flange cover. Lift cover up exposing inside
sing. Uscrew bulb holder and lift holder from housing. Replace
crew bulb holder back into motor housing. Lower top flange
eplace screws.
Flange Cover (#4)
Motor Housing (7)
Electrical Connections
ack and blue (if provided) fan wires to black outlet wire. Connect
ire to white outlet wire and green grounding lead wire from the
onductor to the supply circuit (see figure A). Use wire connectors
ith your fan. No loose strands or loose connections should be
er wires have been connected, they must be spread apart so the
white are on one side of the outlet box and the black and blue
ther side. Turn splices upward and carefully push all wiring into
For optional wall control see figure B or Figure C for alternate
en wall switches are employed, switches should be UL listed for
ling fan.
e sure fan on/off switch is always at "high speed" location if your fan is
additional wall switch.
All manuals and user guides at all-guides.com
16
Black
Electrical Connections
Ground
White
Blue
Black
Figure A
Optional Light
Ground
White
Black
Black
Light Switch
Blue
Figure B
Green
White
Green
White
Optional Light