König Electronic HAV-MCS42 Manual De Uso página 15

2. Repeat all tracks
Press the ST-MO/ CD-MODE button twice during the
playback. And then the "RPT" indicator will be shown
and stay on the display and all the current tracks of
the disc will be played repeatedly.
3. Random Playback
This feature allows you to play all the tracks on a CD
in random order. Press the STO-MO/ CD-MODE
button three times to activate random playback mode
and RND will appear on the display. The player will
now randomly select tracks to play from the disc.
Programmed Playback
The CD player can be programmed to play any sequence
of up to 20 tracks.
1. Load compact disc into CD compartment.
2. Always press the STOP  button before starting
programming. Press the MEM./ CLK,ADJ/ PROG
button in stop mode. PROGRAM and P01 00 appear
in the display.
3. Press / or / button repeatedly to
select the desired track number.
4. Press the MEM./ CLK,ADJ/ PROG button to confirm
your selection. PROGRAM and P02 00 appear on the
display and wait for the next programming. Repeat
the previous steps and the tracks will be stored in order.
5. In order to store the remaining program, repeat the above step 3~ 4 until memory
is full.
6. When programming is completed, press BAND/  button to play the programmed
sequence of tracks. PROGRAM appears on the display.
Clear Program (Resume Normal Playback)
Press  STOP button twice in the program mode, or open the CD Door, or switch to
another function mode to clear the program.
MP3 OR WMA DISC OPERATION
Normal Playback
When an MP3 or WMA disc is loaded into the unit, the unit
will begin scanning automatically and the total number of
tracks will show on the display. The player will begin to
play automatically from the first track. The folder number
and the track number always flash in the display by turns.
Pause control
The same process as CD operation (above).
Skip track and high-speed music search
The same process as CD operation (above).
All manuals and user guides at all-guides.com
15