SETTING UP AND CONNECTING
1.
Remove all the accessories from the display carton carefully. Verify that you have
all the necessary accessories before you dispose of the carton.
2.
Remove all the packing materials from the individual components. Do not remove
any labels or stickers on the back panels of the main unit.
Standard accessories
Please check if you have the following accessories:
•
Instruction manual x 1
•
Main unit x 1
Replacing battery for the Remote Control
The remote control battery is already installed at the
factory. If the remote control stops operating, replace the
battery with a new one.
1.
Squeeze the notched tab A while pulling the battery
door latch B out to take the battery holder out.
2.
Insert a "CR2025" 3V lithium battery. Make sure the
polarity (the + and – side of the battery) is correct.
3.
Replace the battery holder on the remote control.
Follow these precautions when using battery in this device.
1.
Use only the size and type of battery specified.
2.
Be sure to follow the correct polarity when installing the battery as indicated in
the battery compartment. Reversed polarity may cause damage to the device.
3.
If the device is not to be used for a long period of time, remove the battery to
prevent damage or injury from possible battery leakage.
4.
Do not try to recharge battery, it is not intended to be recharged and doing so
may cause the battery to rupture or leak.
5.
Battery shall not be exposed to excessive heat such as direct sunlight, fire or
the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with same or equivalent type.
All manuals and user guides at all-guides.com
•
•
BATTERY PRECAUTIONS
7
Remote control x 1
Main speaker x 2