All manuals and user guides at all-guides.com
CLEANING THE UNIT
•
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
•
If the cabinet becomes dusty, wipe it with a soft dry dust cloth. Do not use any
wax or polish sprays on the cabinet.
•
If the cabinet becomes dirty or smudged with fingerprints it may be cleaned with
a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes, as this will mar the finish of your unit.
•
This product is not intended for commercial use. Household Use Only
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
If you have a problem, please check the following chart to see if you can fix it before
consulting a servicing professional.
Symptom
Radio
No signal from the Radio
Noise or sound distorted
on MW or FM broadcasting
FM STEREO indicator
does not light
MW or FM no sound
CD/MP3 Player
CD Player doesn't play
CD skips while playing
TROUBLESHOOTING GUIDE
Possible cause
The unit is not in Radio
mode
Station is not tuned
properly for MW or FM.
FM: Wire antenna is not
extended enough.
MW: The unit is not
positioned correctly.
FM signal is not strong
enough or the station is not
in stereo broadcasting.
The unit is not at TUNER
function MW or FM band.
Volume is at minimum.
The unit is not in CD mode. Press CD button to enter
CD is not placed or placed
incorrectly.
Disc is non-standard.
Disc is not compatible with
format.
Disc is dirty or scratched.
20
Solution
Press the TUNER button to
select TUNER mode
Retune the MW or FM
broadcast station
Extend FM wire antenna
Reposition the unit until the
best reception is obtained
Extend antenna or find
another FM stereo station
Press the BAND button to
select MW or FM band.
Increase the volume level
CD mode
Load a CD; check that the
CD is placed in the tray
with the label side facing
upward
Use the correct disc
Change it to compatible
CD format.
Wipe the disc with a soft
dry cloth or use another
disc.