Bosch Kiox 300 Manual De Instrucciones página 10

English – 2
Assembly
Fitting and Removing the Display (see figure A)
To fit the display (1), attach the display (1) to the front edge
of the display mount (8) in the direction of travel, on the
snap-in hook (4) ❶ and press the rear side of the display (1)
on the display mount (8) ❷.
To remove the display (1), pull the display (1) towards you
❶ until you are able to lift off the display (1) ❷.
A retaining strap can be secured to the bridge (10).
Note: The eBike system will switch off if you are riding at un-
der 3 km/h and remove the on-board computer from its
holder. This does not apply to eBikes with assistance up to
45 km/h.
Inserting the Removal Blocker (see figure B)
Note: Depending on the design/mounting of the display
mount, it may not be possible to insert the removal blocker.
The display must be mounted.
Insert the removal blocker (3) into the adapter tray (5) from
below until you hear the removal blocker (3) click into place.
From this point onwards, you can no longer lift off the dis-
play (1) from the display fixture (8) without removing the
display mount (8) from the adapter tray (5) by loosening the
two fastening screws (9).
Note: The removal blocker (3) is not an anti-theft device.
Operation
The displays are operated and the indicators are controlled
via a control unit.
The meaning of the buttons on the operating unit for the dis-
play indicators can be found in the following overview. De-
pending on how long it is pressed for, the select button has
two functions.
Scroll to the left
Scroll to the right
Scroll up
Scroll down
Change to the second page level (press briefly)
Open the settings menu on the status page (press
briefly)
Open page-related options
e.g. <Reset trip> (press and hold > 1 s)
0 275 007 3BK | (03.03.2022)
Please note: All screenshots showing the display and text
on the following pages are from the approved software ver-
sion. The display and/or text may change slightly following a
software update.
Status page
From the start page, you can access the status page by
pressing the button.
80% eMTB
10:45
CONNECTIONS
SETTINGS
a
Battery charge
b
Assistance level
c
Bicycle lights
d
Time
e
Connection indicator
f
Smartphone connection
g
Connection status
h
Settings Menu
You can access the settings menu from this page by pressing
the button.
Note: The settings menu cannot be called up while riding.
The <SETTINGS> settings menu contains the following
menu items:
– <My eBike>
You can find the following menu items here.
▪ <Range reset>
The value for the range can be reset here.
▪ <Auto trip reset>
The settings for automatic reset can be adjusted here.
▪ <Wheel circumf.>
The value of the wheel circumference can be adjusted
or reset to the standard setting here.
▪ <Service>
The next service date is shown here, provided that it
has been set by the bicycle dealer.
▪ <Components>
The components used with their version numbers are
displayed here.
a
b
c
d
e
f
g
h
Bosch eBike Systems