Bosch Kiox 300 Manual De Instrucciones página 11

– <My Kiox>
You can find the following menu items here.
▪ <Statusbar>
You can choose between the <Battery>, <Time>
or <Speed> displays here.
▪ <Language>
You can select your preferred system language here.
▪ <Units>
You can choose between metric or imperial measure-
ments here.
▪ <Time>
You can set the time here.
▪ <Time format>
You can select one of the two time formats here.
▪ <Brightness>
You can set the display brightness here.
▪ <Settings reset>
You can reset all of the system settings to the default
values here.
– Under the <Information> menu item, you will find the
contact details (<Contact>) and certificates
(<Certificates>).
You can leave the settings menu by pressing the
the button.
Press the button to access the start page.
Start page
If you did not select another page before the last time you
switched off, you will be shown this page.
a
Battery charge
b
Assistance level
c
Bicycle lights
i
Unit of speed indicator
j
Indicator name
k
Your performance
l
Speed
m
Motor output
Bosch eBike Systems
The a ... c indicators form the status bar and are shown on
every page.
You can use the
status page or press the button
pages. The statistical data, battery range and average values
are displayed on these pages.
From each of these pages, you can access the second level
of data by pressing the
If the user is on a different page to the start page when they
switch off, the most recently displayed page will appear
again when the eBike is switched on.
Pressing and holding the
set the statistical data for your journey or excursion (not on
the <SETTINGS> page).
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurised water.
Keep the screen of your on-board computer clean. Dirt can
cause faulty brightness detection.
Clean your on-board computer using a soft cloth dampened
button or
only with water. Do not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a
year (including mechanical parts, up-to-dateness of system
software).
In addition, the bicycle dealer may base the service date on
the distance travelled and/or on a period of time. In this
case, the on-board computer displays a message telling you
a
when the service date is due each time it is switched on.
b
Please have your eBike serviced and repaired by an author-
c
ised bicycle dealer.
i
Have all repairs performed only by an authorised bike
u
dealer.
j
Note: If you are handing in your eBike to a bicycle dealer for
k
maintenance, it is recommended that you temporarily deac-
tivate the <eBike Lock> and <eBike Alarm> to prevent
false alarms.
l
After-sales service and advice on using products
If you have any questions about the eBike system and its
components, contact an authorised bicycle dealer.
m
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Transport
If you transport your eBike attached to the outside of
u
your car, e.g. on a bike rack, remove the on-board
computer and the eBike battery to avoid damaging
them.
Disposal
button to change from this page to the
to access additional
button.
select button enables you to re-
The drive unit, on-board computer incl. operat-
ing unit, battery, speed sensor, accessories
0 275 007 3BK | (03.03.2022)
English – 3