Kongskilde MultiCutter MCC GR80 Manual Operativo página 3

EN
Operating instructions Granulator GR80:
Granulator GR80:
GR80 has been developed for continuous cutting of paper and plastic, e.g. edge trimming of roll cutters and
printing machines, etc. The Granulators are so that they can be built into both new and existing pipe
systems.
Standard:
Granulator GR80 with 0,55kW motor, 3x400V, 50Hz.
Accessory:
Integrated frequency converter for 500-4000 rpm.
Oil system.
Transition piece for integration into other pipe sizes.
Granulator marking:
Granulator type GR80 with product number 100240.
The Granulator is also marked with the CE mark and an arrow showing the direction of rotation and
through-flow direction.
Manufacturer:
Lundberg Tech A/S
Foldagervej 12, DK-4623 Lille Skensved
1
Manual_GR80_060123_EN