Descargar Imprimir esta página

Beurer HS 15 Instrucciones Para El Uso página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Important
• Untangle the mains cable [8] if it is twisted.
• Do not pull, twist or bend the mains cable [8] and do not pull or route it over/on sharp, poin-
ted objects or hot surfaces.
• Do not jam the mains cable [8] in drawers or doors, for example. The risk of electric shock is
increased if the mains cable is damaged or tangled.
Straightening/shaping hair
> Dry your hair completely before using the straightener.
> Your hair should be clean and free of styling products. Exceptions to this are special pro-
ducts that aid straightening of the hair.
> Comb your hair with a wide-toothed comb to untangle it.
> Unlock the hair straightener at the locking mechanism [5] by pushing outwards.
> Slide the on/off switch to the left to the "ON" position.
> After about 60 seconds, the straightener is ready for use.
> Divide your hair into individual strands with a width of about 3 to 4 cm. Hold the strands
taut and place them between the heating plates [1] at the roots.
> Move the straightener slowly and smoothly from the roots to the ends. Do not keep the
straightener at any one place for longer than two seconds. This way you will obtain the
best results without overstraining or damaging your hair.
> You can shape the ends by twisting the straightener either outward or inward before you
pull it out over the ends.
Note
For your safety, the straightener shuts off automatically after 30 minutes.
After use
> Slide the on/off switch to the right to the "OFF" position.
> Place the straightener on a non-combustible surface.
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable [8] around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [7].
6. CLEANING AND CARE OF THE UNIT
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric
shock!
• Ensure that no water gets inside the device. Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
15

Publicidad

loading