Publicidad
Idiomas disponibles
Idiomas disponibles
No DAYS ASSIGNeD
PROGRAM
M T W T F S S
2nd
1
2
START
INTERVAL
TIMES
3
ODD
4
EVEN
1 2 3 4
D M Y
STATIONS
DATE
eNTeRING WATeRING DAYS
PROGRAM
M T W T F S S
2nd
1
START
2
INTERVAL
TIMES
3
ODD
4
EVEN
1 2 3 4
D M Y
STATIONS
DATE
Figure 5: LCD Display with Watering Days
8 8
STeP 2: WATeRING DURATIoNS
To set the duration for each station/zone assigned to "Program B"
please do the following:
• Turn the rotary dial to the
STATIoN DURATIoN
position
in "Program B". The display will show a "B" and MINS.
[See Figure 6]
• Press the
NeXT
key until the cursor blinks over the first
station assigned to "Program B". Using the "Watering Plan"
as our example, this would be station 5. [See Figure 2]
• Press and hold the
or
key to enter the watering duration
and press the
eNTeR
key. You should see a "B" over the
Station just programmed. [See Figure 6]
• Following the steps above to set the watering duration for each
remaining station assigned to "Program B" (30 min for station
5 and 30 min for Station 6 our example).
• To skip a station, press the
NeXT
key.
• To erase previously programmed watering durations, press the
CLeAR
key.
STeP 3: ASSIGNING WATeRING INTeRvALS
WATeRING
INTeRvAL. The cursor
• Turn the rotary dial to
will blink to the left of the word Interval. [See Figure 7]
• Press and hold the
or
keys to select the number of days
between watering. Example: If you want to water once every 10
days, set the interval at 10.
• To activate the watering interval, press eNTeR. Example: If
an interval of "3" is entered today, the timer will water for the first
time today, and then again every "3" days.
• To select odd or even day watering, press NeXT. The
cursor will move to either the odd or even setting, then
press eNTeR.
• To erase a schedule, press CLeAR. To enter a new schedule,
press NeXT.
No DURATIoNS eNTeReD
PROGRAM
M T W T F S S
2nd
1
START
2
INTERVAL
TIMES
3
ODD
4
EVEN
1 2 3 4
D M Y
STATIONS
DATE
eNTeRING DURATIoNS
PROGRAM
M T W T F S S
2nd
1
START
2
INTERVAL
TIMES
3
ODD
4
EVEN
B
1 2 3 4
D M Y
STATIONS
DATE
Figure 6: Entering Duration for "Program B"
Reviewing and Changing Your Program
The Hydro-Rain timer lets you easily review a complete watering
schedule. To review Program A watering start times, simply turn
the rotary dial to the
START TImeS
position in Program A and
check the times that have been entered. Using the
NeXT
key, you
may advance through the schedule without fear of disturbing any
programming.
If you want to change the start times, watering days, or interval,
simply follow the directions for that program. After reviewing or
changing a watering schedule, remember to turn the rotary dial back
to
RUN
if you want the timer to automatically follow the program.
PROGRAM
M T W T F S S
2nd
1
2
START
INTERVAL
TIMES
3
ODD
4
EVEN
1 2 3 4
D M Y
STATIONS
DATE
Figure 7: LCD Display with Watering Interval
section 4:
Automatic operation and
Commonly used Features
Caution: This appliance is not intended for use by young children or
infirm persons without supervision. Young children should be supervised to
ensure that they do not play with the appliance.
Ready for Automatic Operation
After programming is complete, turn the rotary selector to RUN.
The sprinkler timer is now fully programmed and ready to use in
the automatic mode. In automatic mode, each station will operate
sequentially, starting with "Program A".
9
Publicidad
