ProBreeze PB-F12 Manual De Instrucciones página 10

FILTER REPLACEMENT
― ―
1. Lift off the top cover.
2. Remove the old filter by pulling it
upwards.
3. Insert the new filter into the main body
of the appliance.
4. Replace the top cover. It is magnetised
and will automatically snap into place.
CLEANING AND MAINTENANCE
― ―
WARNING: ALWAYS TURN THE
APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE
ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER
OR OTHER LIQUIDS TO RUN INTO
THE INTERIOR OF THE APPLIANCE,
AS THIS COULD CREATE A FIRE AND/
OR ELECTRICAL HAZARD.
9 | English
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE THE
APPLIANCE. DO NOT ATTEMPT TO
CLEAN THE APPLIANCE IN ANY
OTHER WAY THAN THAT DETAILED
BY THE MANUFACTURER.
CAUTION: DO NOT USE ANY
TOXIC, CORROSIVE, OR ABRASIVE
CLEANING AGENTS OR SCOURING
SPONGES TO CLEAN THE
APPLIANCE OR THE ACCESSORIES
SUPPLIED. THESE CAN DAMAGE THE
SURFACE. DO NOT SPRAY CLEANING
AGENTS DIRECTLY ONTO OR INTO
THE APPLIANCE.
Product Surface: Clean the exterior
•
surface of the appliance by wiping it with
a soft, damp cloth. Dry the appliance
with a soft, clean cloth.
For extreme dirt, use a soft cloth
dampened with a mild, diluted detergent
to clean, and then wipe dry with a soft
cloth.
Air Inlet and Air Outlet: Regularly clean
•
off accumulated dust using a vacuum
cleaner or a soft brush. Do not let dust
build up, it will reduce the efficiency of
the appliance.
Remote Control: Gently wipe the
•
surface of the remote control with a soft
cloth.
If the remote control will not be used for
an extended period, remove the battery
inside.
Adapter: Gently wipe the surface of the
•
adapter with a soft cloth.
Filter: To extend the lifespan of the filter,
•
use the brush attachment on a vacuum
cleaner to remove dust from the surface
of the filter.