Candy CI642CBB Manual De Instrucciones página 17

2. Touch timer control, the "00" will show in the timer
display. and the "0" fiashes.
3. Set the time for between 1 to 99 minutes by touching
the"-" or" +" control of the timer (e.g. 5)
4. Press the "+" once increases the time by one minute, Press the "-" once decrease the
time by one minute. When the set time exceed 99 minutes, it will automatically
return to "00", if the "-" and "+" keys are pressed simultaneously, the indicator will
display "00".
5. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
NOTE: There will be a red dot in the right bottom corner of power level indication
which indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking
zone will switch off automatically.
Note: Other cooking zones will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the min. timer. The dot of the
corresponding zone blinks.
2. Once the countdown timer expires, the corresponding zone will switch off. Then it
will show the new min. timer and the dot of corresponding zone will flash.
Note: Touch the heating zone selection control, the corresponding timer will be shown
in the timer indicator.
(set to 15 minutes)
(set to 45 minutes)
17