Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
smooth out the bottom
Put 2.5 cm (1 in) to 5 cm (2 in) water in the pool to cover the floor. Once pool floor is slightly
covered, gently smooth out all wrinkles. Start in the center of the pool and work your way
clockwise to the outside.
Ensure that the PVC braces at the bottom of the legs are pulled tight. As the pool fills with water,
continuously check to make sure they are fully extended.
Do not assemble on soft lawn. If you must assemble the pool on a soft surface, timber boards
(not included) must be placed under the feet of the vertical supports to spread the load. The
thickness of the timber boards must not exceed 2 cm (0.8 in).
3
Publicidad
