Publicidad
Idiomas disponibles
Idiomas disponibles
For additional safety information, see www.APSP.org.
THIS PRODUCT IS COMPLIANT TO ANSI/ APSP 4
AMERICAN NATIONAL STANDARD FOR ABOVEGROUND
POOLS / ONGROUND RESIDENTIAL SWIMMING POOLS &
INTERNATIONAL SWIMMING POOL & SPA CODE (ISPSC)
(Only for USA & only for pools with a water depth of more than
91.4 cm (3 ft)).
NOTE:
If your purchased pool set do not have any
circulation system, you can purchase separately. But please
make sure the equipment can turn over total volume of pool
water no less than once every 12 hr. You can check the water
capacity on packaging to select suitable circulation system.
Pump provided for the circulation of water shall be tested by a
Nationally Recognized Testing Laboratory and certified to
conform to UL1081.
Also make sure the selected suction outlet sold with the pump
should be tested by a Nationally Recognized Testing
Laboratory and certified to conform to ASME/ANSI A112.19.8
or its successor standard ANSI/APSP-16, in order to prevent
suction entrapment.
Please read carefully and keep for
future reference
Pool Items: 2622026
CHOOSE THE CORRECT
LOCATION
The surface chosen to install the pool must respect the
following technical characteristics:
1. Because of the combined weight of the water inside the
pool and the pool users, it is extremely important that the
surface chosen to install the pool is capable of uniformly
supporting the total weight for the entire time the pool is
installed. When choosing the surface, take into
consideration that water may come out of the pool when in
use or in the rain. If the water softens the surface, it may
lose its capability to support the pool weight.
2. Check regularly the position of the vertical legs and the
U-supports. They must be on the same level as the bottom
of the pool at all times. If the vertical leg or the U-support
starts to sink into the ground, drain the water immediately to
avoid the pool collapsing due to the uneven loading on the
frame structure. Change the location of the pool or modify
the surface material.
3. We recommend positioning the pool away from any objects
children could use to climb into the pool.
4. Position the pool near an adequate drainage system to deal
with overflow or to discharge the pool.
5. The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the pool. This situation can damage the
welding point of the liner and bend the frame. In the worst
cases, the pool can collapse, causing serious personal
injury and/or damage to personal property.
6. The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the pool
could damage or perforate the bottom of the pool.
7. The selected surface must be clear of aggressive plants
and weed species. Those types of strong vegetation could
grow through the liner and create water leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
8. The selected location must not have overhead power lines
or trees. Be sure the location does not contain underground
utility pipes, lines or cables of any kind.
9. The selected position must be far from house entrance. Do
not position any equipment or other furniture around the
pool. The water that comes out of the pool during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
10. The selected surface must be flat and without holes that can
damage the material of the liner.
Follow the important instructions above to choose the correct
surface and location to set up your pool. Damaged parts of the
pool, due to the fact that the set-up surface and location does
not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any service
claims.
Suggested set-up surfaces: grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does not
meet the above set-up conditions.
NOTE:
Check with your local city council for by-laws
relating to fencing, barriers, lighting and safety requirements
and ensure you comply with all laws.
NOTE:
If have a filter pump, refer to the pump's manual
for instructions.
NOTE:
The ladder must match the pool size and should
be used only for entering and exiting the pool. It is forbidden to
exceed the permitted payload of the ladder. Check regularly if
the ladder is properly assembled.
COMPONENTS LIST
NOTE:
Some parts already have been installed on the pool.
A
E
I
L
O
NO.
A
B
C
E
F
H
I
J
K
L
M
N
O
P
6
B
C
H
F
J
K
M
N
P
6.7 m x 3.7 m x 1.2 m
(22 ft x 12 ft x 48 in)
256002001489
x2
x6
x8
x6
x4
x10
x10
x8
x1
x1
x1
x2
x1
x1
Publicidad
