Publicidad
Idiomas disponibles
Idiomas disponibles
Specifying the speaker parameters on the subwoofer
1
Press ?/1 (POWER) to turn on the subwoofer.
2
Press MENU/ENTER.
3
Turn the VOL/SELECT knob (SETUP is displayed) , and then press MENU/ENTER.
4
Turn the VOL/SELECT knob to select the speaker of which parameter you want to specify,
and then press the MENU/ENTER.
• F-DST (FRONT DISTANCE)
• C-DST (CENTER DISTANCE)
• R-DST (REAR DISTANCE)
5
Turn the VOL/SELECT knob to set the speaker parameter, and then press MENU/ENTER.
6
Repeat Step 2 to 5 to set other parameters.
z
When you press MENU/ENTER for more than 2 seconds while setting on the subwoofer, the display will be
returned to the previous menu.
Parameters
The following are the parameters.
xF-DST (FRONT DISTANCE)
Set the distance from the front speakers to the listening position.
Front speaker distance can be set in 0.2 meter (1 foot) steps from 0.2 to 5 meters (1 to 16 feet).
The default figure is 2.4 meters (8 feet).
xC-DST (CENTER DISTANCE)
Set the distance from the center speaker to the listening position.
Center speaker distance can be set in 0.2 meter (1 foot) steps from a distance equal to the front
speaker distance to a distance 0.6 meters (2 feet) closer to the listening position. The default
figure is 2.4 meters (8 feet).
xR-DST (REAR DISTANCE)
Set the distance from the rear speakers to the listening position.
Rear speaker distance can be set in 0.2 meter (1 foot) steps from a distance equal to the front
speaker distance to a distance 1.6 meters (5 feet) closer to your listening position. The default
figure is 2.0 meters (6 feet).
Note
If the front or rear speakers are not placed an equal distance from your listening position, set the distance of the
closer speaker.
GB
14
Downloaded from:
?/1 (POWER)
https://www.usersmanualguide.com/
MENU/
VOL/
ENTER
SELECT
Publicidad
