Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Operation
Control LED of the cabin light
Operating mode LEDs.
Indicate the selected operating
G Mode button, selects the operating
mode or switches to the next operating
5.7.
Remote control (optional)
The remote control can be delivered as an optional feature. Refer to the delivery papers for the items
included in delivery.
Function
The remote control is used for:
d
starting and ending sauna/SANARIUM operation
d
Changing over between the individual forms of bathing
d
Switching on and off the cabin light.
When the remote control is connected, the
.
The
light
and the
operating modes
independently of each other.
Switching on/off the cabin light:
1.
Press the light button H
.
Switching off is locked during bathing operation.
Switching on/off bathing operation:
RISK OF FIRE
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1.
Switch on the master switch on the control unit.
2.
Press the mode button G
3.
The selected program starts automatically three seconds after the last press of a button.
.
The next operating mode is selected by each further press of the button.
.
If the SANARIUM was in operation for longer than 10 minutes before the end of the program, the
subsequent drying program starts automatically at the end of the program. During the subsequent
drying program, the END LED flashes on the display of the remote control. The LED goes out at the
end of the subsequent drying program.
'
For further the procedure of the subsequent drying program - see Chapter 5.6.
PAGE 14
mode.
mode.
symbol appears in the control unit display.
on the remote control and on the control unit can be operated
.
. The LED of the selected bathing program shines.
SANARIUM C
H Light button,
switches on/off the cabin
light
5070188/07.02
Publicidad
