Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Individual settings
6.3.
Setting the humidity, SANARIUM
1.
To select the
2.
To change the set value of the
3.
Confirm the set value using the
.
If the value deviates from a standard program, the value will be automatically stored in the
individual program of the active bathing program (Sauna or SANARIUM).
6.4.
Setting the bathing duration
1.
To select the
.
The value that can be changed flashes.
2.
Use the up/down buttons
.
The standard bathing duration is 4 hours.
3.
Confirm the set value using the
.
The flashing value changes to continuous display.
.
If the value deviates from a standard program, the value will automatically be stored in the
individual program of the active bathing program (Sauna or SANARIUM).
.
The remaining bathing time appears in the display together with the (hour-glass) symbol
6.5.
Preselection mode
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1.
To select the
2.
Use the up/down
3.
Confirm the set time using the
4.
The program is started automatically, taking the heating-up period into account. The cabin will be
ready for bathing at the set time.
.
Preselection mode can be ended by selecting the End operating mode.
The control unit starts prior to the set time!
PAGE 18
menu, use the left/right buttons
button.
menu, use the left/right buttons
to change the flashing value.
button.
menu, use the left/right buttons
buttons to make the preselection.
button.
Button:
Description:
A Light button
B Operating mode button
C Left/Right buttons
D Up/Down buttons
E OK button
.
bar display, use the up/down
.
.
SANARIUM C
buttons.
.
5070188/07.02
Publicidad
