Senix BLVE12-M Manual Del Operador página 7

Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this manual
including all text under subheading therein before set up
or use of this product.
ASSEMBLE AS A BLOWER
1. Slide the blower tube forward until the notched area
on the blower housing clicks into the slot on the
blower tube.
2. Insert the concentrator nozzle onto the end of the
blower tube until it locks into position (Fig. 1).
Notched area
Air outlet
NOTE: The concentrator nozzle is used to increase air
etc.).
3. Before using the blower function, rotate the lock knob
to lock the cover in place(The indicator will be on the
far right position,Fig. 2).
WWW.SENIXTOOLS.COM
ASSEMBLY
Fig. 1
Blower tube
Concentrator
nozzle
Fig. 2
4. To remove the blower tube, turn the ON/OFF power
switch to the OFF (O) position and disconnect the
tool from the power supply (Fig. 3).
ON
5. Press the tube release button and remove the blower
tube (Fig. 4).
Tube release button
1. Slide the front and rear vacuum/mulcher tubes
together until the lock button engages (Fig. 5).
OFF
Fig. 3
Fig. 4
Fig. 5
7