Senix BLVE12-M Manual Del Operador página 8

2. Rotate the lock knob to unlock the cover (The
indicator is on the far left position,Fig. 6).
3. With the blower tube removed, insert the "hooked"
Side end of the mulcher tube into the rear clip on the
unit. Rotate the lock knob to close the front tube (The
indicator is on the far right position,Fig. 7).
Rear clip + Hook side
4. Make the inter cover hook the hook of the rear tube
(Fig. 8).
8
5. Insert the collection bag adaptor into the blower air
outlet until the collection bag is securely fastened
(Fig. 9), then make the bag hook the strap holder on
the two sides of the tube (Fig. 10).
Fig. 6
1
Fig. 7
1. To remove the collective bag ,release the bag from
the strap holder on the two sides of the tube,and
simply press the tube release button to remove the
bag (Fig. 11).
Fig. 8
2. To remove the vacuum/mulcher tube assembly,
release the inter cover from the hook of the tube,
rotate the lock knob to unlock , then remove the tube
assembly from its housing (Fig. 12).
2
Tube release button
1
WWW.SENIXTOOLS.COM
Fig. 9
3
Fig. 10
Fig. 11