Casada braintronics ALPHASONIC III Manual página 27

Remote Control
TURN ON THE POWER SUPPLY
Plugging
MASSAGE FUNCTION CONTROL OPERATION:
1. Standby
After the massage chair is powered on and
turned off, the remote controller is blank in
the standby state (i.e. the LED lamp is off)
and cannot perform any operation (except
the key switch). You can use the armrest
shortcut keys to adjust the angle of the back-
rest and leg rest. You can also use the voice
control button for wakeup.
2. Start massage
Press the switch to start the massage. Enter the start-up screen. The backrest will maintain
the default position, and the leg rest will be slightly raised. Just wait for any one of auto-
matic function programs in the automatic function selection interface to start massage. If
no "AUTO" function is selected within 5 minutes, the massage chair will automatically shut
down.
52
Product Power switch
connection
:
Auto ProgramME
Fast massage
Comfort massage
Relax massage
Stretch massage
Full body massage
Neck & shoulder massage
Select the object with and press OK
Remote Control
BODY SENSING
1. Lying angle adjustment
After selecting any automatic function, the positions of the backrest and the leg rest will be
adjusted to the preset angles. After the angle is adjusted, the massage chair will automat-
ically perform the shoulder position and body shape detection.
NOTE: The fast massage function can only detect the shoulder position, other modes are for
full body shape and position detection. Wait for completion of this detection or alternatively
press "OK" to skip the step.
Auto lying down
Attention!
Ensure that there are
no objects around
the massage chair.
Press OK to skip
2. Shoulder position adjustment
After detecting the shoulder position, the buzzer beeps. If there is a difference from the actu-
al shoulder position, adjust it to one of the 11 levels by pressing the "Up" or "Down" button.
The massage will start by default according to the shoulder height if no shoulder position is
detected. If no adjustment is made within 10 seconds, the massage functions starts automat-
ically. Press "OK" directly to start immediately.
NOTE: During the massage, you can press the "Left button" or the "Right button" on the
navigation interface to select the "Shoulder adjustment" menu, confirm with "OK" and call
up the shoulder adjustment interface. You can also use the "Up" or "Down" key to adjust
the shoulder position.
:
Auto Mode Shoulder position
:
Fast massage
Knead
Back speed Back intensity
Upper air
Roll speed
Adjustment
Shoulder
Please use
Select the object with and press OK
position and press OK
Body sensing
Just a moment...
Press OK to skip
:
·
Low shoulder position
·
Suitable shoulder position
·
High shoulder position
to adjust the shoulder
53