SPECIFICATIONS
Model
Motor
Power Source
Running Horse Power
Current
Tank Capacity
Maximum Pressure
Free Air Delivery
Lubrication
Duty Cycle
KNOW YOUR AIR COMPRESSOR
Before attempting to use this product, familiarize yourself
with all operating features and safety rules. (Fig. 2)
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated
bearings.
ON/OFF POWER SWITCH
This switch is used to start or stop the air compressor.
Moving the switch to the (ON) position will provide
automatic power to the pressure switch which will allow
the motor to start when the air tank pressure is below the
factory set cut-in pressure. When in the (ON) position,
the pressure switch stops the motor when the air tank
pressure reaches the factory set cut-out pressure. Moving
the switch to the (OFF) position will remove power from the
motor and stop the air compressor.
ELECTRIC MOTOR & AIR COMPRESSOR PUMP
The motor is used to power the pump. The electric motor
has a thermal overload protector. If the motor overheats for
any reason, the thermal overload will cut off power, thus
preventing the motor from being damaged. Wait until the
motor is cool. Motor resets automatically.
Air compressor pump: to compress air, the piston moves
up and down in the cylinder. On the down stroke, air is
drawn in through the air intake valve while the exhaust
valve remains closed. On the upstroke, air is compressed,
the intake valve closes and compressed air is forced out
through the exhaust valve, into the discharge line, through
the check valve and into the air tank.
00Book_EC914S_NA.indb 11
00Book_EC914S_NA.indb 11
at 40 PSI (2.8 bar)
at 90 PSI (6.2 bar)
EC 914S
Single-Phase, universal motor
Single-Phase, 120 V AC 60 Hz
1.3 HP (0.97 kW)
13.5 A
6 gal. (22.7 ltr)
200 PSI (13.8 bar)
5.1 CFM (144.4 ltr/min)
4.0 CFM (113.3 ltr/min)
Oil-less
S3 50% - 5 minutes ON and 5 minutes OFF
SAFETY VALVE
This valve is designed to prevent system failures by
relieving pressure from the system when the compressed
air reaches a predetermined level. The valve is preset by
the manufacturer and must not be modifi ed in any way.
DRAIN VALVE
The drain valve is used to remove moisture from the air
tank.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of air
being delivered through the hose.
The air pressure coming from the air tank is controlled
by the regulator knob. Turn the pressure regulator
knob clockwise to increase discharge pressure and
counterclockwise to decrease discharge pressure. Follow
tool operating instructions for recommended pressure
range.
AIR TANK
The tank is used to store the compressed air.
QUICK COUPLER
The outlet is used to connect the 1/4 in. NPT air hose.
English
11
2020/06/08 13:46:34
2020/06/08 13:46:34