Kohler Flushometer Instrucciones De Instalación página 3

Before You Begin
Follow all local plumbing and building codes.
Your product may appear different than the one illustrated. The installation
procedure is the same.
For adequate water flow, use the proper sized supply pipe for each fixture. Refer to
the "Roughing-In" section.
For retrofit (RF) models: Remove the existing valve body and start at the "Install the
Valve Body" step.
For touchless models with top-mount sensors:
• The area above the sensor must be clear of objects.
• Do not install a light fixture above the sensor.
• Use a split grab bar for ADA installations.
Turn OFF the water supply.
1339618-2-D
Kohler Co. 3