Kohler Flushometer Instrucciones De Instalación página 9

5. Check for Leaks
IMPORTANT! Do not open the control stop beyond the flow capacity of the fixture.
The fixture must accommodate continuous flow from the valve in the event of a
failure.
Open the control stop 1/2 turn. The valve may flush.
If flushing is continuous, open the control stop further.
When flushing stops, check for leaks.
For touchless models: Continue to the "Test the Sensor" section.
For manual models: Continue to the "Adjustment" section.
Kohler Co. 9
1339618-2-D