American Standard SAVER AM00495 400 Serie Instrucciones De Instalación página 6

4
INSTALLING FRAME
2 PEOPLE REQUIRED
VIEW FROM INSIDE
1A and 2A Secure assembly to wall using previously drilled holes.
NOTE: The Cupped Washers (22) hold Screw Cover Caps
in place. Apply silicon sealant onto threads of
screws before screwing into place.
1A
Screw M4x35 and Cupped Washer (22)
2A
Snap Screw Cover Caps (3) over screws and Cupped Washers.
5
FIXING ASSEMBLY TO WALL POSTS
Ensure door assembly is centered in opening. Push door
assembly down to top of tub before anchoring screws to
wall posts.
1A & 2A — Drill Pilot Holes
1B & 2B — Place plastic Cupped Washers (22) over
M4x10 screws and screw into place at each pilot hole.
1C & 2C — Snap Screw Cover Caps (3) over each screw head.
VIEW FROM INSIDE
1A
Ø1/8" BIT
Ø3.2mm
1B
SCREW M4X10
AND CUPPED WASHERS.
710286-100 Rev. 2 03/2020
2A
2B 1C
1A OUTSIDE VIEW
1
2C
SCREW
COVER CAPS
6
2A
F i x e d Pa n e l
2