Expondo Royal Catering Manual De Instrucciones página 32

7. Use
7.1. Before use
1. Clean the following parts with warm water and a cloth:
a. Dough bowl
b. Dough hook
c. Dividing rod
2. Dry the parts thoroughly.
7.2. Switching on and starting up
Fire hazard caused by short-circuiting. Always check if the voltage stated on the type plate of
•
the product matches with the power outlet voltage.
• Electrical shock hazard caused by short-circuiting. Always connect the power cable to a
grounded power outlet.
• Tripping hazard. Never place the power cable in a walkway. Always place the power cable
out of the way from walkways. Leaving the power cable in a walkway can cause moderate
injury.
To switch on the product:
1. Plug the power cable [#] into a power outlet.
2. Rotate the power switch [#] clockwise to 1 / ON to switch on the product. The lights of the
SPEED and TIMER display [#][#] light up and a beep is emitted.
7.3. Using the product
7.3.1. Placing the dough in the bowl
To place the dough in the bowl:
1. Rotate the safety guard [#] upwards.
2. Place the dough into the bowl [#].
3. Rotate the safety guard [#] downwards.
7.3.2. Adjusting the mixing settings
To use the speed menu buttons:
1. Press one of the speed menu buttons [#] to choose a pre-set.
Pre-set 2 will run after pre-set 1 is finished, when pre-set 2 has been set before running pre-
set 1.
When speed menu 1 is changed, speed menu 2 remains unchanged.
When speed menu 2 is changed, speed menu 1 remains unchanged.
To use the speed adjustment buttons:
2. Press the SPEED adjustment buttons [#] to change the speed of the dough hook and bowl.
The maximum speed mode is 10.
The selected pre-set updates according to the changes made.
To use the timer adjustment buttons:
[#]
[#]
[#]
13