Descargar Imprimir esta página

ProBreeze PB-13 Manual De Instrucciones página 5

Ocultar thumbs Ver también para PB-13:

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
― ―
This dehumidifier uses Peltier Technology (no compressor) making it lightweight and quiet. It is
perfect for small rooms and poorly ventilated areas such as wardrobes, cabinets and storage
rooms that are susceptible to damp odours. Using this dehumidifier will help eliminate unwanted
moisture from the air.
Switching On
1.
Place the appliance on stable and level surface. Connect the power adaptor to the nearest
mains wall socket.
2.
Switch the dehumidifier ON using the ON/OFF switch. The green LED will illuminate and you
should feel a light breeze blowing out of the dry air outlet.
3.
To switch OFF, press the ON/OFF switch again.
Emptying the water tank
The dehumidifier can collect up to 500ml (18oz) of water per day and the tank has a maximum
capacity of 1500ml (52oz). When the tank is full, the LED will turn YELLOW and the unit will turn off.
1.
When full, turn OFF the dehumidifier and simply pull the water tank out.
2.
Place the water tank a stable surface and remove tank cover using thumb hole and
following instructions below.
3.
Then, gently tilt tank over a sink to empty.
4.
When done, replace cover on tank and then carefully slot water tank back in.
CLEANING & STORAGE
― ―
WARNING: ALWAYS TURN THE APPLIANCE OFF, UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
8 of 32 | English
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
Always empty the water tank, clean and dry the
appliance when not in use to prevent mould.
Cleaning the water tank:
Remove and empty the water tank as per the instructions
above.
Clean the water tank with warm tap water and mild
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
Ensure to remove any scale or deposits that have formed
inside the water tank.
Wipe all surfaces dry before placing the water tank back
into the appliance.
Storage:
To store your product, we recommend using the original
or a similar-sized box.
Store the appliance in a safe, clean and dry place, away
from direct sunlight and out of reach of children when
not in use.
FCC STATEMENT
― ―
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
English | 9 of 32

Publicidad

loading