Alpina 871125238005 Manual De Instrucciones página 9

Bringing the appliance into use
The voltage at the power supply must match that shown on
the rating plate (220-240V ~ 50Hz) on the device.
Switching on and off
DANGER OF BURNS! The device becomes hot during
operations. Make sure no one, especially a child or pet, is
placed in any danger by the operation of the device.
Do not touch the ventilation slots (2) and the device itself (5).
Let it cool down completely first.
Operation
1. The convector has an On/Off switch. To switch the convector on, put
the On/Off switch (1) on the left-hand side of the appliance into
position "I" (750 / 1250 / 2000 W).
2. To switch the convector off, put the On/Off switch (1) on the side of
the device into position "O".
3. Use the thermostat (6) to set the desired temperature.