Descargar Imprimir esta página

SOLAC PP7261 Instrucciones De Uso página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
All manuals and user guides at all-guides.com
(C) which will let you spread
your hair evenly between the
teeth of the comb and to untan-
gle your hair with ease. (FIG 1)
- Clamp the straightener plates
(E) and pull them slowly from
the roots to the tips of the hair
(see fig. 1).
- Repeat until your hair is straight.
STEAM STRAIGHT OPTION
- Activate the steam buttom
selector (K).
- Fill the tank with wather.Grip the
sides of the container with your
thumb and index finger, press
water tank button it as you pull
straight up-it will lift out. Fig 3.1
and 3.2.
- Open the rubber plug on the
bottom and pour distilled water
into the chamber. After be full
of water, see bellow step 3.3
insert front end of the cham-
ber to the slot position, then
press the bottom of chamber to
match well, as step 3.4 and 3.5
indicate.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
- Turn the appliance off, using the
on/off switch.
- Unplug the appliance from the
mains.
- Empty the wather tank.
Cleaning
- Disconnect the appliance from
the mains and allow it to cool
before undertaking any cleaning
task.
- Clean the equipment with a
damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Never submerge the appliance
in water or any other liquid or
place it under running water.
- If the appliance is not in good
condition of cleanliness, its
surface may degrade and
inexorably affect the duration of
the appliance's useful life and
could become unsafe to use.
Anomalies and re-
pair
- Take the appliance to an autho-
rised technical support service
if product is damaged or other
problems arise. Do not attempt
to disassemble or repair the
appliance yourself as this may
be dangerous.
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT IS
REQUESTED IN YOUR COU-
NTRY:

Publicidad

loading