Preparing the product for use
Inserting / replacing the battery
To insert / replace the battery
Removing nose and ear hair
Note: Do not use the product if the blade
Take off the protective cap
ON / OFF switch
CAUTION! DANGER OF INJURY! Be careful not to insert the
device too deep into nose or ears. Carefully insert only the tip of the
blade into the front area of your nostril or ear. Remove the nose or ear
hair with small circular movements.
After using the trimmer, switch the device off by pushing the ON / OFF
switch downwards.
Cutting eyebrows
Select the long comb attachment
depending on the desired hair length ("Long"
length; "short"
50 GB/MT
9
. Switch the device on by pushing the
1
upwards.
3
: approx. 4 mm length).
7
, proceed as shown in Fig. B.
is deformed or damaged.
2
or the short comb attachment
6
6
: approx. 7 mm
7