EN-2
1.2
Safety Precautions
CAUTION Read all safety warnings before installing, making connections, or
servicing this equipment. Failure to comply with these warnings could result in
personal injury and/or property damage. Retain all instructions for future reference.
Verify that the AC adapter's input voltage range and the plug type are compatible with the
local AC power supply.
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
Use the equipment only in dry locations.
Dry off any liquid spills immediately. The instrument is not watertight.
Use only approved accessories and peripherals.
Operate the equipment only under ambient conditions specified in these instructions.
Disconnect the equipment from the power supply when cleaning.
Do not operate the equipment in hazardous or unstable environments.
Service should only be performed by authorized personnel.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
WARNING Do not use this instrument in an environment subject to explosion
hazards. The housing of the instrument is not gas tight (explosion hazard due to
spark formation, corrosion caused by the ingress of gases).
CAUTION When using chemicals and solvents, comply with the instructions of the
producer and the general lab safety rules.
STARTER 5000 Bench pH Meter