Care & Maintenance - Maclaren Sherpa Manual Del Usuario

ONLY USE SILICONE LUBRICANTS
N'UTILISER QUE DES LUBRIFIANTS À
BASE DE SILICONE
USAR SOLAMENTE LUBRICANTES DE
SILICONA
NUTZEN SIE NUR SILIKONGLEITMITTEL
USARE SOLO LUBRIFICANTI A BASE DI
SILICONE
SADECE SİLİKON YAĞLAYICI KULLANIN
44
CARE & MAINTENANCE
• It is the responsibility of the individual consumer purchaser to assure that all functional parts are
installed properly, and subsequent normal maintenance services and adjustments necessary to keep
the buggy in good operating condition are properly made.
• Your buggy should be periodically checked for indication of potential problems. These are
important safety checks for your child's safety and may prevent a shortened product lifecycle,
accidents, or harm to your child:
• Check all rivets and connecting devices for tightness and security.
• Inspect all parking devices, wheels and tyres and replace or repair if necessary.
• Check all safety devices for correct operation, in particular the primary and secondary locks.
These should be free to move at all times.
• Do not continue to use your buggy if in doubt or you feel it is unsafe.
• We recommend a service every 12 months.
• If wheels squeak, lubricate sparingly with silicone lubricant. Do NOT use oil or grease based
products, as this will attract dirt, which will clog the movement.
• To maintain your buggy's performance, purchase replaceable parts on maclarenbaby.com.
• Only Maclaren replacement parts should be used. It is unsafe to use parts not supplied by Maclaren.
• Accessories which are not approved by Maclaren may not be used
and will void warranty.
CLEANING
• Clean frame with a damp cloth and a mild detergent, do not use abrasives and dry thoroughly.
• If the buggy chassis parts have been exposed to salt water we recommend that they be rinsed down
with fresh (tap) water as soon as possible afterwards.
• The hood may be sponged lightly using a damp cloth and a mild detergent.
• The seat cover may be washed – see care labels for details and dry thoroughly before reuse.
• Do not fold or store the product while wet and never store in a damp environment as this can cause
mildew to form.
en
45