Publicidad
Idiomas disponibles
Idiomas disponibles
19 Transporting the Blower, Battery and Charger
► If the battery or blower became wet during operation,
allow them to dry separately and completely before
charging or storing.
19 Transporting the Blower, Battery and
Charger
19.1 Blower
When transporting the blower:
► When transporting the blower by hand, carry it by the
control handle.
► When transporting the blower in a vehicle, secure and
position the blower to prevent turnover, impact and
damage.
19.2 Battery
WARNING
To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, never transport the battery
in a metal container or near metal objects (e.g., paper clips,
nails, coins, keys), @ 6.1.
0458-008-8601-A
When transporting the battery:
► Place the battery in a non-metal container or carton and
secure it against impact or damage. Never transport the
battery in a metal or other container that is capable of
conducting electricity, or near metal objects (e.g., paper
clips, nails, coins, keys).
► If you are transporting the battery in a vehicle, secure it
and its container to prevent turnover, impact and damage.
STIHL batteries comply with the requirements set forth in
UN-Manual ST/SG/AC.10/11/Rev.7/Part III, Subsection
38.3.
Commercial air, vessel and ground transportation of lithium
ion cells and batteries is regulated. The battery is classified
as a UN 3480, Class 9, packaging group II product. Shipping
it, either as a complete tool or the battery, requires
compliance with all applicable shipping regulations. Check
with the ground, vessel, air cargo or passenger airline to
determine if transport is prohibited or subject to restrictions
or exemptions prior to shipping or travel.
Normally, no further conditions have to be met by the user in
order to transport STIHL batteries by road to the power tool's
operating site. Check and comply with any special
regulations that may apply to your situation.
For further information please go to
www.stihlusa.com/battery-transportation-safety.
19.3 Charger
To properly transport the charger:
► Disconnect the charger from the electrical outlet.
► Remove the battery from the charger.
► Wrap the power supply cord and attach it to the charger,
@ 20.3.
► When transporting the charger in a vehicle, ensure that it
is secured in a manner that prevents turnover, impact and
damage.
English
23
Publicidad
