Husqvarna FS400LV Manual De Usuario página 15

To engage and disengage the parking
brake
1. Disengage the parking brake (A) to move the
product.
A
2. Engage the parking brake (B) to hold the product in
position.
To start the product
WARNING:
blade is slightly above the ground.
• Refer to the operator's manual supplied by the
engine manufacturer.
To stop the operation
1. Use the lever to unlock the cutting depth wheel.
1852 - 001 - 25.11.2022
B
Make sure that the cutting
2. Turn the cutting depth wheel clockwise to fully lift the
cutting blade. Push the lever to lock the cutting depth
wheel.
3. Use the lever to lock the cutting depth wheel.
4. Stop the water supply.
To stop the product
WARNING:
push the machine stop button to stop the
product quickly.
WARNING:
for a while after the engine stops.
Note:
The lever for the cutting depth wheel must
always be locked when the cutting depth wheel is not
in use.
1. Turn the engine ON/OFF switch to the OFF position.
Refer to the operator's manual supplied by the
engine manufacturer.
2. If the product has parking brakes, engage the
parking brakes.
To operate the product
WARNING:
depth wheel must always be locked when
the cutting depth wheel is not in use.
If there is an emergency,
The cutting blade rotates
The lever for the cutting
15