Publicidad
Idiomas disponibles
Idiomas disponibles
7
Technical data:
Hydraulic gear pump type
Voltage type
Protection class
Motor power
Fuse protection supply line
Max. delivery pressure of hydraulic gear pump
High-pressure piston pump Unit size
Max. delivery pressure (at unit outlet)
Max. delivery rate (at free outlet)
Media temperature (lower temperatures possible,
but subject to the fluidity of the grease)
Noise level
Thread
Grease outlet
Suction tube diameter
Suction pipe length
Weight (mobile unit without grease container
Pumped media, lubricants:
Greases up to consistency 2 (NLGI / class 2 according to DIN 51818) can be used. Pastes without
lubricating properties (with abrasive emery content) as well as greases or pastes based on silicone oil
and thickened with PTFE must not be processed with this unit.
8
Disposal
After use, the unit must be disposed of in an environmentally friendly manner in
accordance with the applicable legal regulations.
Greasy parts do not belong in the dustbin!
Your contribution to environmental protection:
The applicable regulations for the notification, installation and operation of systems for the
handling of substances hazardous to water must be observed by the operator.
(e.g. WHG, VawS and TRbF).
12
MATO
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
GmbH & Co. KG
EP 400
230V / 50 Hz
IP 55
0,75 KW; 5,3 A
16 A
16 bar
10-25 kg
50 kg
425 bar
320 ccm/minute
5°C to +50°C
approx. 67 dB(A)
R ¼"
40 mm
495 mm
690 mm
40 kg
41,5 kg
Operating instructions
eHybrid-Greaser
200 kg
885 mm
--
Publicidad
